this is information on a product in full production. july 2014 docid023771 rev 3 1/10 ferd30m45c field effect rectifier datasheet - production data features ? advanced rectifier proprietary process ? stable leakage current over reverse voltage ? reduce leakage current ? low forward voltage drop ? high frequency operation description this dual center tap field effect rectifier provides stable leakage current over the full range of reverse voltage and low forward voltage drop. packaged in to-220ab, i2pak or d 2 pak, this device is intended to be used in solar bypass junction boxes and in switch mode power supplies. a1 a2 k a1 k a2 a1 k a2 to-220ab d 2 pak i 2 pak a1 k a2 table 1. device summary symbol value i f(av) 2 x 15 a v rrm 45 v t j (max) +175 c (up to 200 c forward mode only on d2pak) v f (typ) 0.35 v www.st.com
characteristics ferd30m45c 2/10 docid023771 rev 3 1 characteristics when diodes 1 and 2 are used simultaneously: t j (diode 1) = p(diode1) x r th(j-c) (per diode) + p(diode2) x r th (c) table 2. absolute ratings (limiting values, per diode, at 25 c, unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 45 v i f(rms) forward rms current 30 a i f(av) average forward current, = 0.5 t c = 155 c per diode per device 15 30 a t c = 155 c i fsm surge non repetitive forward current t p = 10 ms sinusoidal 250 a t stg storage temperature range -65 to + 175 c t j maximum operating junction temperature 175 c t j maximum operating temperature on d2pak (dc forward current without reverse bias, t = 1 hour) (1) 200 c 1. condition to avoid thermal runaway for a diode on its own heatsink. dptot dtj --------------- 1 rth j a ? () ------------------------- - < table 3. thermal resistance symbol parameter value (max) unit r th(j-c) junction to case per diode 1.6 c/w total 1.05 r th(c) coupling 0.5
docid023771 rev 3 3/10 ferd30m45c characteristics 10 to evaluate the conduction losses use the following equation: p = 0.27 x i f(av) + 0.012 i f 2 (rms)) table 4. static electrical characteristics (per diode) symbol parameter test conditions min. typ. max. unit i r (1) reverse leakage current t j = 25 c v r = v rrm 600 a t j = 125 c 25 50 ma v f (2) forward voltage drop t j = 125 c i f = 7.5 a 0.305 0.350 v t j = 125 c i f = 10 a 0.350 0.395 t j = 25 c i f = 15 a 0.420 0.470 t j = 125 c 0.420 0.450 1. pulse test: t p = 5 ms, < 2% 2. pulse test: t p = 380 s, < 2% figure 1. average forward power dissipation versus average forward current (per diode) figure 2. average forward current versus ambient temperature ( = 0.5, per diode) 0 2 4 6 8 10 12 0 2 4 6 8 101214161820 p f(av) (w) i f(av) (a) t =tp/t tp = 0.05 = 0.1 = 0.2 = 0.5 = 1.0 0 2 4 6 8 10 12 14 16 18 0 25 50 75 100 125 150 175 t amb (c) i f(av) (a) t =tp/t tp r r t t h h ( ( j j - - a c ) ) = figure 3. junction capacitance versus reverse voltage applied (typical values, per diode) figure 4. forward voltage drop versus forward current (per diode) c(pf) 100 1000 10000 1 10 100 v r (v) f=1 mhz v osc =30 mv rms t j =25 c 0.1 1.0 10.0 100.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 v fm (v) i fm (a) t j =25c (maximum values) t j =125c (maximum values) t j =125c (typical values)
characteristics ferd30m45c 4/10 docid023771 rev 3 figure 5. relative variation of thermal impedance junction to case versus pulse duration figure 6. reverse leakage current versus reverse voltage applied (typical values, per diode) z th(j-c) /r th(j-c) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.e-04 1.e-03 1.e-02 1.e-01 t p (s) single pulse i r (a) m 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 0 5 10 15 20 25 30 35 40 45 v r (v) t j =125 c t j =25 c t j =150 c t j =85 c
docid023771 rev 3 5/10 ferd30m45c package information 10 2 package information ? epoxy meets ul94, v0 ? cooling method: by conduction (c) ? recommended torque value: 0.8 to 1.0 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 7. d 2 pak dimension definitions g l l3 l2 b b2 e * flat zone no less than 2mm a c2 d r a2 m v2 c a1 *
package information ferd30m45c 6/10 docid023771 rev 3 figure 8. footprint (dimensions in mm) table 5. d 2 pak dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 a1 2.49 2.69 0.098 0.106 a2 0.03 0.23 0.001 0.009 b 0.70 0.93 0.027 0.037 b2 1.14 1.70 0.045 0.067 c 0.45 0.60 0.017 0.024 c2 1.23 1.36 0.048 0.054 d 8.95 9.35 0.352 0.368 e 10.00 10.40 0.393 0.409 g 4.88 5.28 0.192 0.208 l 15.00 15.85 0.590 0.624 l2 1.27 1.40 0.050 0.055 l3 1.40 1.75 0.055 0.069 m 2.40 3.20 0.094 0.126 r 0.40 typ. 0.016 typ. v2 0 8 0 8 16.90 10.30 8.90 3.70 5.08 1.30
docid023771 rev 3 7/10 ferd30m45c package information 10 figure 9. to-220ab dimension definitions d table 6. to-220ab dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 c 1.23 1.32 0.048 0.051 d 2.40 2.72 0.094 0.107 e 0.49 0.70 0.019 0.027 f 0.61 0.88 0.024 0.034 f1 1.14 1.70 0.044 0.066 f2 1.14 1.70 0.044 0.066 g 4.95 5.15 0.194 0.202 g1 2.40 2.70 0.094 0.106 h2 10 10.40 0.393 0.409 l2 16.4 typ. 0.645 typ. l4 13 14 0.511 0.551 l5 2.65 2.95 0.104 0.116 l6 15.25 15.75 0.600 0.620 l7 6.20 6.60 0.244 0.259 l9 3.50 3.93 0.137 0.154 m 2.6 typ. 0.102 typ. diam. 3.75 3.85 0.147 0.151 a c d l7 dia l5 l6 l9 l4 f h2 g g1 l2 f2 f1 e m
package information ferd30m45c 8/10 docid023771 rev 3 figure 10. i 2 pak dimension definitions d table 7. i 2 pak dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.173 0.181 a1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.035 b1 1.14 1.70 0.044 0.067 c 0.49 0.70 0.019 0.028 c2 1.23 1.32 0.048 0.052 d 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.195 0.203 e 10 10.40 0.394 0.409 l 13 14 0.512 0.551 l1 3.50 3.93 0.138 0.155 l2 1.27 1.40 0.050 0.055 e l2 l1 b1 d a1 c c2 a b e e1 l
docid023771 rev 3 9/10 ferd30m45c ordering information 10 3 ordering information 4 revision history table 8. ordering information order code marking package weight base qty delivery mode ferd30m45ct ferd30m45ct to-220ab 2.2 g 50 tube FERD30M45CG-TR ferd30m45cg d 2 pak 1.5 g 1000 tape and reel ferd30m45cr ferd30m45cr i 2 pak 1.4 g 50 tube table 9. document revision history date revision changes 12-nov-2012 1 initial release. 12-nov-2013 2 updated title. 11-jul-2014 3 added i2pak package.
ferd30m45c 10/10 docid023771 rev 3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
